Roller Door / Roller Shutter / Shutter (RRSD-005)
Roller Door / Roller Shutter / Shutter (RRSD-005)
Roller Door / Roller Shutter / Shutter:
-Material
RRSD Model built on double skin foam filled steel/aluminium 55mm, 60mm, 77mm slat, vented as standard but also available non-vented.
-Common use
Domestic shop / Domestic Garage Door / Doors / Surverys & Cabinet
-Maximun Width
6000mm
-Weight
5kg per square meter for aluminium; 8.3-13.6kg per square meter for steel
-Finsh
White, brown, cream or wood grain, Bottom salt-white, dark brown
-Shutter Box
Roll formed aluminium in two sections; Top and bottom boxes
Bottom box removable for installation and maintenance and Chamfered at45 degree
The shutter box is assembled on die cast aluminium endplates
-Guide Rail
Extruded aluminium with an intergral box section for reinforcement and to facilitate fixing. High density 6mm pile brush seals for quiet and smooth operation.
-Operational
A. Rod Crank Operation
For shutters up to 10kg and 25kg
Incorporate a geared rod crank handle 1500mm long which hangs vertically and secures into a clip not in use. The gear is installed in the box, the gear ratio varies with shutter weight.
B. Pulley Belt Winder
For shutter up to 15kg
The pulley coils the blet when it is pulled to open the shutter
The belt is 14mm and grey in color. External shutters are supplied with a guide tube to protect the belt through the building wall
C. Geared Belt Winder
For shutter between 15kg to 25kg.
1: 3 ratio with removable handle for belt operated shutter
D. Single Phase Electric
Provision of a 13 amp fused spur is required for installation
Atubular motor within the barrel assenbly with limit switches and the thermal cut out to prevent overheating.
Draw 220volts and 0.5-2.5 AMPS dependant upon the shutter size
Control
Standard security keyswitch or rocker switch. Other controls are available on request.
Roller Door / Roller Shutter / Shutter (RRSD-005) product offered by Wei Neng Door Co., Limited
